Posted in

Is TPU film waterproof?

Hey everyone, it’s Jake here, and for the past 7 years, I’ve been deep in the TPU film game—my crew and I supply these versatile films to all kinds of folks, from phone case makers to outdoor gear designers, and one question comes up so often I’ve lost count: “Wait, is TPU film actually waterproof?” TPU Film

I get it. If you’re looking for material for something that’s going to be around water, whether it’s a waterproof phone pouch liner, a rain jacket patch, or a protective cover for outdoor gear, you don’t want to gamble on something that might leak or break down after a few weeks in the rain or a dip in the pool. A lot of people hear TPU and just think “another plastic,” but let’s cut through the confusion here because the short answer isn’t as straightforward as you might think—at least not without the right context.

First, let’s break down what TPU even is, real quick, because a lot of the misinformation out there comes from people not knowing the basics. TPU stands for Thermoplastic Polyurethane, right? It’s a type of polymer that mixes the rubbery flexibility of polyurethane with the moldability of thermoplastics. What that means for you is it’s stretchy, tough, can take a beating, and can be melted and formed without being ruined for good (unlike, say, regular rubber). But when it comes to water resistance, not all TPU films are created equal. That’s a huge point I make to every customer who walks through our door or slides into our DMs.

So, let’s start with the core property: pure, standard TPU film is inherently hydrophobic. Wait, what’s hydrophobic? Just means it repels water, basically. The molecular structure of TPU doesn’t have any gaps or pores big enough for water molecules to seep through, right? Unlike, say, woven polyester, which has tiny spaces between fibers that water can wick through over time. Good quality TPU film, like the stuff we supply, is non-porous, so at a basic level, it will keep water out—for a while, anyway.

But here’s the catch that trips so many people up: that water resistance isn’t permanent. There are a ton of factors that can make TPU film stop being waterproof, and most of them have to do with how it’s made, how it’s treated, and how it’s used. Let’s run through the common ones because this is where most folks go wrong.

First, thickness matters, a lot. If you’re buying a super thin, budget TPU film—like the stuff you might find in a cheap phone screen protector that peels off after a month—even if it’s non-porous, it’s way more prone to tearing, scratching, and getting tiny pinholes. A pinhole is basically a tiny gap that water can sneak through, and once that’s there, that’s a weak point. Our standard TPU films start at 0.1mm, but we have thicker options up to 1mm+ for heavy-duty uses like industrial liners. If you need something that’s going to be around water a lot, don’t skimp on thickness. The cheap thin stuff might seem like a good deal at first, but it’ll fail way faster.

Next, additives and coatings. A lot of TPU films on the market have extra stuff added for specific uses—like UV stabilizers for outdoor gear, or anti-scratch coatings for phone cases, or even antimicrobial stuff for medical applications. But some coatings can break down the hydrophobic properties over time. Wait, why? Let’s say you have a TPU film that’s coated with a fluoropolymer to make it extra water repellent. Over months of exposure to sunlight, or repeated washing, that coating can start to wear off, right? Once that top layer is gone, the base TPU is still hydrophobic, but it’s not as resistant to things like saltwater, detergents, or UV radiation. Oh, and saltwater is a big one—TPU is actually resistant to most chemicals, but prolonged exposure to saltwater (like if you use a marine liner for a boat that sits in the ocean) can break down the polymer structure over years, making it less flexible and more prone to tiny tears that let water in.

Then there’s the big one for a lot of our customers: seam integrity. TPU film itself might be waterproof, but if you’re welding two pieces together to make a product—like a dry bag, or a rain suit—those seams are the weak point. If you use the wrong welding method, or if the welding isn’t done correctly, there will be gaps in the seam that water can seep through. We always tell customers that even the best TPU film in the world is useless for waterproof applications if you mess up the seams. But here’s a pro tip: our TPU films are specifically formulated to be heat-weldable, so you get a strong, watertight seam every time, no messy adhesives that can also break down over time. That’s a big difference from generic TPU film you might buy from a random supplier—we test every batch to make sure the weld strength and seam waterproofing hold up.

Wait, let’s also clear up a myth: TPU vs. other materials for waterproof use. A lot of people ask why we’d use TPU instead of PVC, or silicone, or even neoprene. Let’s be real, PVC is waterproof, but it’s not flexible, it’s not stretchy, and it off-gasses weird stuff that some people don’t like. Silicone is waterproof, but it’s way more expensive, and it’s not as tear-resistant as TPU. Neoprene is great for wetsuits, but it absorbs water over time, right? Yeah, neoprene is porous, so it gets heavy when it’s wet. TPU? It doesn’t absorb water at all. That’s a huge plus. We had a customer a few years back who made waterproof laptop sleeves and switched from neoprene to our TPU film, and he told us his customers stopped complaining about their sleeves getting waterlogged after rain—game changer for his product.

But let’s get back to the “is it waterproof” question, because I don’t want to leave anyone hanging. Let’s outline the scenarios here, so you know exactly when TPU film works and when it doesn’t:

  1. Short-term, fresh water exposure (like a spill, or a quick dip in a pool): 100% yes, if it’s good quality TPU film, no pinholes, no seams to mess up. We test our films in tap water for 100+ hours straight, and they hold up perfectly.
  2. Long-term fresh water exposure (like a pool liner, or a garden hose cover): Still works, but you have to pick the right grade. Our UV-stabilized TPU is made for outdoor use, so it won’t break down from sun exposure, and it resists mold and mildew too.
  3. Saltwater exposure, or exposure to detergents/chemicals (like a boat cover, or a pet water bowl liner): It works, but it won’t last forever. Even the best TPU will degrade a bit over years of saltwater exposure, so you’d replace a marine liner every 5-7 years, which is standard for most waterproof materials.
  4. Extreme conditions (like repeated freezing and thawing, or sharp impacts): If the TPU gets torn or punctured, then obviously water can get in. But good TPU is flexible even in cold temperatures, so it’s less likely to tear than, say, regular plastic in the winter.

Wait, let’s talk about what TPU film isn’t good for, too, so no one makes a mistake. If you need something that’s completely waterproof forever, with zero chance of breaking down, TPU might not be the right call for every single use. For example, if you’re making a product that’s going to be submerged in harsh industrial chemicals 24/7, you might need a different material. But for 90% of the waterproof applications our customers come to us for—phone cases, dry bags, rain gear, outdoor equipment covers—TPU is more than enough, and it’s way more versatile than other options.

I also want to address a common complaint we hear: “My TPU film product got wet and failed.” More often than not, that’s not the TPU itself, that’s bad installation or bad quality material. We had a customer last year who bought cheap TPU film from a supplier overseas, made a line of waterproof wristbands, and within 3 months, half of them were leaking. When he sent us a sample, we looked at it and realized the film was only 0.05mm thick—super thin, easy to tear, and the seams were poorly welded. The material itself was garbage, not TPU’s fault. We supplied him with our 0.2mm heavy-duty TPU, and he rebranded his wristband line, and now his return rate is under 1%. That’s the kind of thing I wish more people knew: not all TPU is equal.

Another thing: testing. If you’re not sure if a TPU film is waterproof, ask for a sample and test it yourself. The easiest way is to cut a small piece, tape it over a glass of water, and leave it upside down for 24 hours. If no water seeps through, it’s solid. That’s a simple test anyone can do, no fancy equipment needed. We send free samples all the time to potential customers, because we’re confident our stuff passes that test every time.

Wait, let’s also touch on sustainability, because a lot of our customers care about that now. TPU is recyclable, right? Unlike PVC, which is super hard to recycle, TPU can be melted down and reprocessed into new film or other products. So when your TPU product does reach the end of its life, it’s less waste than other waterproof materials. That’s a big selling point for a lot of brands these days.

So to wrap this all up, let’s answer the original question clearly: Is TPU film waterproof? Yes, but only if it’s high-quality, made for the right application, installed correctly, and used within its intended limits. It’s not a one-size-fits-all material, but when used properly, it’s one of the most reliable, versatile, and durable waterproof materials out there for a huge range of products.

If you’re someone who’s working on a project that needs a waterproof film, whether it’s a new line of phone cases, outdoor gear, medical devices, or industrial liners, I’d be stoked to chat with you. We work with small startups and big brands alike, so no project is too big or too small. We can send you free samples, talk through the best grade for your specific use case, and help you make sure your final product is everything you want it to be—waterproof, durable, and built to last.

Don’t waste time with cheap, random TPU film that’ll fail in a month. Reach out to us, and let’s make something that actually works.

Thermoplastic Polyurethane Film References:

  1. Plastics Industry Association. (2021). Thermoplastic Polyurethane (TPU) Properties and Applications. Washington, D.C.: Plastics Industry Association.
  2. ASTM International. (2019). Standard Test Method for Water Vapor Transmission Rate of Thin Plastic Sheeting. West Conshohocken, PA: ASTM International.
  3. European Chemical Industry Council. (2020). Sustainability Profile of Thermoplastic Polyurethanes. Brussels: European Chemical Industry Council.
  4. Journal of Applied Polymer Science. (2018). Degradation Behavior of TPU Films Under Outdoor Environmental Exposure. Hoboken, NJ: John Wiley & Sons.

Suzhou Xinqipu New Materials Technology Co., Ltd.
As one of the most professional TPU film manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to wholesale bulk customized TPU film from our factory. Also, quotation is available.
Address: No.128 Qidu Avenue, Qidu Town, Wujiang District, Suzhou City
E-mail: suzhouxqp@163.com
WebSite: https://www.cnxinqipu.com/